DigiDesign D-Command Dokumentacja Pobierz pdf (Strona 18)

Command|8 Guide12

Connecting a Footswitch

(Optional)

The Punch In connector on the Command|8

back panel supports footswitch control of Track-

Punch and QuickPunch audio punch-in and

punch-out recording features. Both continuous

on/continuous off and instantaneous on/off

pedals with a 1/4-inch TRS connector are sup-

ported.

To connect a footswitch:

 Connect the footswitch jack to the Punch In

connector.

Connecting MIDI Devices to

Command|8

Command|8 provides 16 channels of MIDI in-

put and 32 channels of MIDI output through

the MIDI IN 1, MIDI OUT 1, and MIDI OUT 2

connectors on the back panel. The connectors

accept standard 5-pin MIDI cables.

Command|8 driver software, installed when you

install Pro Tools (or standalone) software, is re-

quired for MIDI communication to function.

These drivers are recognized by MIDI Studio

Setup (Windows), and by Audio MIDI Setup

(Mac).

To connect MIDI devices to Command|8 for

Pro Tools:

1 Using standard 5-pin MIDI cables, connect the

MIDI Out port of a MIDI keyboard or other MIDI

device to the MIDI In 1 port of your Com-

mand|8, and connect the MIDI In port of your

MIDI device or controller to the MIDI Out 1 port

of your Command|8.

2 Connect MIDI Out 2 of Command|8 to the

MIDI In port of an additional MIDI device (such

as a sound module).

3 To monitor or record the audio output of your

MIDI devices within Pro Tools, connect the au-

dio outputs of your devices to available audio in-

puts on your Pro Tools audio interface.

USB MIDI Communication and

Command|8 Operating Modes

When connected to Pro Tools through USB,

Command|8 is recognized as a MIDI Control

Surface and MIDI interface (the Command|8

MIDI connectors are available as MIDI In and

Out ports).

Configuring MIDI

Communication with

Command|8

After connecting Command|8 and installing its

software, configure your MIDI studio to com-

municate with Command|8.

Configuring MIDI Studio Setup

(Windows Only)

On Windows systems, use MIDI Studio Setup to

configure MIDI communication with Com-

mand|8.

MSS automatically finds the MIDI ports on

Command|8, and lets you specify a custom

name for each port on Command|8 within the

MIDI Studio Setup document.

To define a MIDI port on Command|8 with MIDI

Studio Setup:

1 Choose Setup > MIDI > MIDI Studio in

Pro Tools.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 65 66

Komentarze do niniejszej Instrukcji

Brak uwag

Modèles	Type de document
Caribbean	Manuel d'instructions Dickinson Caribbean Instruction manual, 22 pages
Mediterranean	Manuel de l'utilisateur THE MEDITERRANEAN MIGRATION MOSAIC [en] , 1 pages

DigiDesign D-Command Dokumentacja Strona 18

Komentarze do niniejszej Instrukcji

Dickinson Fours manuels d'utilisation

DigiDesign D-Command Dokumentacja Strona 18

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Oprogramowanie DigiDesign D-Command

Dickinson Fours manuels d'utilisation